Scroll down to «Telescope» section and click on «Setup» If device asks for a password during the connection – enter «12345678» and press «OK».Įxample of telescope configuration and management with use of SkySafari software:ĭownload and install the software. Then turn on your mobile device Wi-Fi mode and connect to the access point with SSID – «AutoFi». Spend a standard setting procedure recommended by the manufacturer of the telescope, namely enter into the remote location coordinates of observation, the current time and make alignment the telescope at the stars. Important: No external power supply or batteries required to power up this bluetooth adapter!Ĭonnect AutoFi WiFi adapter to RS-232 serial port on the hand controller and to AUX port on the mount (before turning on the power of the telescope) HW Virtual Serial Port software creates a TCP-COM bridge allow Windows based astronomical aplications comunicate throught WIFi moduls.

To use the adapter on a PC, you must create a TCP-COM port bridge. It works with the SkySafari, Orion StarSeek 4 4.4.4 application for mobile devices. It can be used for a rapid telescope targeting with help of mobile devices such as smartphones or tablets. Compatible with any telescope controlled by AutoStar telescope control system.